TECHNICAL SPECIFICATIONS

• Developed and designed according to DIN 14497 (small extinguishing systems) based on EN 12094-1
• Fault and alarm identification directly via LEDs on the control panel
• Power supply via wide range input from 11 to 32 V DC (optional battery emergency operation)
• Housing protection class IP68
• Adjustable operating mode via DIP switch: manual, 1- or 2-line dependency for detection, alarm and extinguishing output
• Manual triggering (double buttons to avoid unintentional false triggering) and extinguishing delay (“Hold”) also possible at the control panel of the control unit
• Two monitored limit alarm lines for connecting up to 4 conventional smoke detectors, multi-sensor detectors, linear heat detectors, rod heat detectors, flame detectors each
• 1 monitored alarm line for external manual control device according to EN 12094-1
• 1 monitored limit value signal line for external extinguishing delay button (stop button)
• 1 output external alarm device
• 1 monitored extinguishing agent output (optimized for monitored control of max. 4 Stat-X aerosol extinguishing cartridges)
• 3 configurable, potential-free alarm outputs with change-over contact 30 V DC / 1 A load (sum fault, pre-alarm, main alarm)
• Operating voltage: 11 – 32 V DC
• Quiescent current nominal: 41 mA
• Alarm current: 1 to 4 A (short-time) in connection with an aerosol extinguisher (4 extinguishers, depending on the dimension)
• dimensions: 120 x 80 x 57 mm
• weight: 99 g
• Material housing: PC (UL 94 / V0)

STANDARDS:

• EU Directive 2014/30/EU;
• FCC compliance according to EN 50130-4/2011
• FCC CFR 47, part 15/2013
• EN 61000 (parts 4-2 to 4-8)
• EN 61000 (part 6-3 / 2012)
• EN 50155, EN 50121-3, EN 60068, EN 61373