Point detectors for ringbus

DISCOVERY OPTICAL SMOKE DETECTOR

59.760.51

• Optical smoke detector based on the scattered light principle
• Optimized installation and commissioning due to simple addressing by means of patented XPERT card in the detector base
• Automatic quiescent value tracking integrated
• 5 different EN54-certified operating modes (sensitivities) integrated in the detector and selectable via the control panel
• No functional impairment due to wind or air pressure fluctuations
• 360° alarm visibility through 2 LEDs
• 4 bytes fixed memory (EEPROM) e.g. for storing the last revision date
• Immediate alarm signal by alarm bit
• Output for parallel status indicator
• Timeless elegant design
• Detector test from the control unit
• Tested according to EN 54-7, EN 50155, EN 50121-3, EN 60068, EN 61373, EN 45545-2 (HL3)

DISCOVERY MULTI-SENSOR (optical/heat)

59.760.52

• Multisensor consisting of optical smoke detector (scattered light principle) and heat detector
• Optimized installation and commissioning due to simple addressing by means of patented XPERT card in the detector base
• Automatic quiescent value tracking integrated
• Improved containment of false alarms
• Insensitive to wind or air pressure
• 5 different EN54-certified operating modes (sensitivities) integrated in detector and selectable via control panel
• Can be used as a pure thermal detector or a pure optical detector depending on the operating mode
• No functional impairment due to wind or air pressure fluctuations
• 360° alarm visibility through 2 LEDs
• 4 bytes of fixed memory (EEPROM) e.g. for storing the last revision date
• Immediate alarm signal by alarm bit
• Output for status indicator
• Timeless elegant design
• Detector test from the control unit
• Tested according to EN 54-7, EN 54-5, EN 50155, EN 50121-3, EN 60068, EN 61373, EN 45545-2 (HL3)

DISCOVERY HEAT DETECTOR

59.762.01

• Heat detector with thermistor
• Optimized installation and commissioning due to easy addressing by means of patented XPERT card in the detector base
• 5 different EN54-certified operating modes (sensitivities) integrated in detector and selectable via control panel
• No functional impairment due to wind or air pressure fluctuations
• 360° alarm visibility through 2 LEDs
• 4 bytes fixed memory (EEPROM) e.g. for storing the last revision date
• Immediate alarm signal by alarm bit
• Output for status indicator
• Timeless elegant design
• Detector test from the control unit
• Tested according to EN 54-5, EN 50155, EN 50121-3, EN 60068, EN 61373, EN 45545-2 (HL3)

BASE WITH ISOLATOR

59.760.53

• XPERT addressing
• The detectors can only be inserted into the base in the specified orientation
• Locking function to prevent unauthorized detector removal
• Super bright LED
• Detects wiring short circuit faults
• Minimizes operational failures due to short circuit faults
• Up to 20 detectors or their equivalent load can be installed between isolators.
• Stainless steel contact terminals
• Isolator integrated
• Tested according to EN 54-17, EN 50155, EN 50121-3, EN 60068, EN 61373, EN 45545-2 (HL3)